분말야금의 장단점
장 점
단 점
1) 기계가공을 생략할 수 있다.
2) 제조과정에서 융점까지 온도를 올릴 필 요가 없다.
3) 용해법으로 만들 수 없는 합금의 제조 가 가능
4) 다공질의 금속재료 제조가능
5) 다량생산이 가능
7) 양호한 표면 상태를 얻을 수 있다
8) 형태와 치수가 균일하다
9) 표면
2. 2. Extraction
After the fermentation, the microorganisms(Alcaligenes latus) are filled with PHB in their body. These PHBs have to be separated from microorganisms to make final product. To separate PHBs from biomass, they are extracted from biomass by using solvent. These PHB extracted solvent will experience washing and drying process. After that, PHB can be precipitated as white powder.
process of milk (Up & Midstream.)
Skim milk (milk) puts into dissolution tank and U.H.P(a high temperature sterilizer) then transfer into cultivation tank. It transfers to be homogeneous and remove the microorganism again. then the milk getting a high temperature is cool by freezer.
• material milk
use marketing milk, powdered milk,
If marketing milk, using intact, or removing g
uses a laser as the power source to sinter powdered material (typically metal).
The laser selectively fuses powdered material by scanning cross-sections generated from a 3-D digital description of the part.
After each cross-section is scanned, the powder bed is lowered by one layer thickness, a new layer of material is applied on top, and the process is repeated until the part is completed.
has more strong light intensity than single chip WLED, but process is too complicate and not cost effective. And electron transfer is slow caused by 2-dimensional chip.
2. RGB-LED Nano Wire ??
Existed RGB-LED structure is 3-chip structure(emit red, green, blue) and mixture structure that constructed with One single chip(emit blue light) and different size quantum dots(emit light by
1. 개요
제약 / 바이오 의약품 산업 지원자분들 중 낯설어 어디부터 조사해야 하는지 모르겠는 분들에게 도움을 드리고자 작성하였습니다. 생산지원팀, 엔지니어링팀에 지원하더라도 제약 / 바이오 의약품 산업이 무엇이고, 그 안에서 해당 직무는 어떠한 우위를 점하고 있는지에대한 전반적인 지식
Q2 나의 KOLON (회사 및 직무 지원 동기) (500자/1000 bytes)
코오롱생명과학은 API 중심의 바이오 분야에서 변화의 노력을 아끼지 않으며 인류 건강증진에 노력하는 중심기업입니다. 이에 그치지 않고 19년 이상의 긴 시간을 통해 경쟁력 있는 파이프라인을 확보하며
3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the
관련 기술 발전에 따라 3D 프린터의 활용성이 증가하면서 관심이 고조
3D 프린터는 비용과 시간을 절약하기 위해 주로 기업의 시제품 제작에 이용
- 전통적인 시제품 제작 방식은 여러 단계를 거쳐야 하는 반면 3D 프린터를 이용할 경우 설계 데이터만 있으면 제작이 가능하고 디자인 수정도 용이
- 람